Zaloudek's Marine Honda Engines -
Mid-Range 60HP Power Thrust -
Unmatched maneuverability and convenience

Zaloudek's Marine - Honda Marine Logo

Performance and Efficiency

Zaloudek's Marine Honda Engines Mid-Range 60HP Power Thrust

Reliability and Durability

  • 4-Front Corrosion Protection
  • Engine Alert System - The Engine Alert System uses visual, audio and RPM reduction circuits to alert the operator of over-heating, low oil PSI and over-revving. This helps to prevent engine damage.
  • Corrosion Tolerance - A fresh water flushport flushes debris and saltwater out of the engine. Painted interior cooling passages help extend the life of the outboard.
  • Ultra Low 3 Star CARB Emissions
  • True 5 Warranty

 

Convenience and Ease of Use

 

Zaloudek's Marine Honda Engines Mid-Range 60HP Power Thrust

 

Zaloudek's Marine Honda Engines Mid-Range 60HP Power Thrust

Engine

 

Type 4-Stroke SOHC, 3 Cylinder/12 Valves
Displacement 998 cc (61.0 cubic inches)
Bore & Stroke 73 mm x 79.5 mm (2.9 x 3.1 inches)
Full Throttle RPM Range 5,000-6,000 RPM
Rated Power 60 HP @ 5,500 RPM
Cooling System Water Cooled
Fuel Delivery Programmed Fuel Injection
Ignition System MicroComputer Programmed
Starting System Electric
Exhaust Through Hub
Lubrication Wet Sump
Trim Range -4° to +16°
Tilt Range 60°
Steering Angle (to port and again to starboard)  50°
   

Drive

 
Gear Ratio 2.33:1
Gear Shift F-N-R
   

Equipment

 
Alternator  (Electric Start) 27-Amp
Battery Charging Power 22 Amp
Propeller Optional
Power Tilt NA
Power Trim & Tilt Standard
Gas Assisted Tilt NA
Oil Pressure Alert Standard
Temperature Alert Standard
Rev-Limiter Standard
Speedometer Pickup Standard
   

Dimensions

 
Overall Width 417 mm/16.4 inches
   

Dry Weight

 
L-Type 116 kg/256 lbs.
X-Type 123 kg/270 lbs.
   

Transom Height

 
L Type 531 mm/20 inches
X Type 658 mm/25 inches