Zaloudek's Marine Honda Engines - Portables 15HP  Make a quiet entrance

Zaloudek's Marine - Honda Marine Logo

Performance and Efficiency

  • 4-Stroke Design
  • Available with Power Thrust Design (BFP) - The 10" x 7 5/8" Power Thrust 4-blade propeller creates 60% more thrust in reverse and 15% more in forward. The result? Improved maneuverability and performance.
  • Reverse Exhaust Relief (BFP models)
  • Large Displacement - At 21.4 cubic inches, the 15hp has one of the largest displacements in its class. Along with the long-stroke design, this provides optimum torque throughout the RPM range.
  • Easy One Hand Starting - A built-in decompression release and digital CDI system set the BF15’s ignition timing. This reduces the effort required to pull-start the engine by hand by 40%!
  • Auto Start Enrichment
  • Pendulum Mount System
  • 3 Stage Carburetion - Conventional 2-circuit carburetors go directly from a lean mixture at idle to a rich setting at full throttle. The BF15 adds a third stage for better economy and smoother operation.
  • EZ Steer Friction Control - A unique lever design allows you to precisely adjust steering tension for improved control and comfort.
  • Shallow Water Drive - An innovative shallow water drive feature lets you tilt the motor up, allowing you to easily operate in shallow areas. Shallow water drive greatly reduces the risk of engine damage.
Zaloudek's Marine Honda Engines Portables 15HP

Reliability and Durability

 

Convenience and Ease of Use

  • Lightweight Design - The lightest 4-stroke model in its class, the BF15 is easy to transport and convenient to mount.
  • Power Tilt - Conveniently allows user to tilt the unit out of the water. At low speeds acts like a power shallow-water-drive device, permitting access to the shallow water areas.
  • High Output Charging - The BF15 has the largest alternator in its class. It generates 12 Amps at only 3000 RPM. This helps to maintain battery charge and keep electronics running at trolling speeds.
  • Integrated Carrying Handle - A integrated carrying handle makes transporting the engine a breeze. The convenient, foldaway carry handle is situated at the exact top/bottom balance point of the engine. This means the engine carries more easily in a level position.
  • Longer Tiller Handle - A convenient longer tiller handle improves control and reduced steering effort. The extended handle is made of a lightweight composite, increasing its durability while decreasing the motor's weight.
  • Up Front Tiller Controls - A convenient front-mounted shift lever allows fingertip shifting. The Twist Grip Throttle & Tensioner minimize driver fatigue.
  • Available in 15-, 20-, and 25-inch shaft lengths

Zaloudek's Marine Honda Engine Portables 15HP

 

 

Zaloudek's Marine Honda Engine Portables 15HP

Engine

 

Type 4-Stroke SOHC, 2 Cylinder/4 Valves
Displacement 350 cc (21.4 cubic inches)
Bore & Stroke 59 mm x 64 mm (2.3 x 2.5 inches)
Full Throttle RPM Range 4,500-5,500 RPM
Rated Power 15 HP @ 5,000 RPM
Cooling System Water Cooled
Fuel Delivery 1 Carburetor
Ignition System PGM-IG
Starting System Electric/Recoil
Exhaust Through Hub
Lubrication Wet Sump
Trim Range 4-Stage: 8°, -12°, -16°, -20°
Tilt Range 72°
   

Drive

 
Gear Ratio 2.08:1
Gear Shift F-N-R
   

Equipment

 
Alternator with voltage regulator (Electric Start) 12-Amp (148 watt)
Alternator with voltage regulator (Manual Start) 6-Amp (76 watt)
Propeller 4-Blade Aluminum
Diameter x Pitch, Standard 9 1/4 x 10 inches
Diameter x Pitch, Power Thrust 10 x 7 3/8 inches
Power Tilt Available
Oil Pressure Alert Standard
Temperature Alert Standard
Rev-Limiter Standard
   

Dimensions

 
Overall Width 350 mm/13.8 inches
   

Dry Weight

 
S-Type 47 kg/104 lbs.
L-Type 50 kg/110 lbs.
X-Type 52 kg/115 lbs.
   

Transom Height

 
S Type 381 mm/15 inches
L Type 508 mm/20 inches
X Type 635 mm/25 inches